BS EN 1662-1998 Hexagon bolts with flange Small series
|
ID： |
599EDFBEC83643D690B166F19FA01135 |
|
文件大小(MB)： |
0.65 |
|
页数： |
12 |
|
文件格式： |
|
|
日期： |
2024-6-23 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BS EN,1662:1998,BRITISH STANDARD,Hexagon bolts with,flange — Small series,(ISO/DIS 15071:1996, modified),——,キs*,The European Standard EN 1662:1997 has the status of a,British Standard,ICS2L060.10,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,BS EN 1662:1998,National foreword,This British Standard is the English language version of EN 1662:1997.,The UK participation in its preparation was entrusted by Technical Committee,FME/9, Bolts, nuts and accessories, to Subcommittee FME/9/6, General purpose,fasteners and accessories, which has the responsibility to:,- aid enquirers to understand the text;,- present to the responsible European committee any enquiries on the,interpretation, or proposals for change, and keep the UK interests infonned;,- monitor related international and European developments and promulgate,them in the UK,A list of organizations represented on this subcommittee can be obtained on request,to its secretary,Cross-references,The British Standards which implement international or European publications,referred to in this document may be found in the BSI Standards Catalogue under the,section entitled “International Standards Correspondence Index"，or by using the,“Find” facility of title BSI Standards Electronic Catalogue.,A British Standard does not purport to include all the necessaiy provisions of a,contract. Users of British Standards are responsible for their correct application.,WARNING,The United Kingdom as a member of CEN is obliged to publish EN 1662:1997 as a,British Standard. However, attention is drawn to tlie fact that during the,development of this European Standard the United Kingdom has consistently voted,against its approval as a European Standard. The UK believes that the,corresponding ISO Standard, ISO/DIS 15071:1996 should have been implemented as,the European Standard. As far as the UK is concerned, it is dangerous and not,acceptable to have a separate European Standard that differs from the,corresponding ISO Standard by the across flats dimension for one size of fastener,all other requirements being identical between the two standards concerned.,As part of BSPs duty of care, we draw attention to users of this standaid to our,concerns that M12 bolts to this standard differ from similar fasteners conforming to,ISO/DIS 15071:1996 in the across the flats dimension only. This is 16 mm in the,European Standard and 15 mm in the ISO. BSI will assume no liability whatsoever,for the failure on the part of any user of this standard not to consider this aspect.,Precautions are urged to ensure that comingling of M12 bolts to the two standards,concerned is avoided.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 8, an inside back cover and a back cover,This British Standard, having,been prepared under the Amendments issued since publication,direction of the Engineering _ _,Sector Board, was published Amd. No.,under the authority of the,Date Text affected,effect on 15 April 1998,. BSI 1998,ISBN 0 580 29329 7 ------------------,EUROPEAN STANDARD,NORME EUROPEENNE,EUROPAISCHE NORM,EN 1662,December 1997,ICS 21.060.10,Descriptors: Fasteners, screws, hexagonal head screws, dimensions, dimensional tolerances, characteristics, verification, designation,English version,Hexagon bolts with flange — Small series,(ISO/DIS 15071:1996, modified),Ws a tete hexagonale a embase,cylindro-tronconique - Serie etroite,(ISO/DIS 15071:1996, modifiee),Sechskantschrauben mit Flansch — Leichte Reihe,(ISO/DIS 15071:1996, modifiziert),This European Standard was approved by CEN on 1997-10-24.,sss CEN members are bound to comply with the CEN/CENELEC Internal Regulations,sss which stipulate the conditions for giving this European Standard the status of a,= national standard without any alteration. Up-to-date lists and bibliographical,SS references concerning such national standards may be obtained on application to,the Central Secretariat or to any CEN member.,か This European Standard exists in three official versions (English, French, German).,* A version in any other language made by translation under the responsibility of a,CEN member into its own language and notified to the Central Secretariat has the,same status as the official versions.,CEN members are the national standards bodies of Austria, Belgium, Czech,Republic, Denmark, Finland, France, Germany Greece, Iceland, Ireland, Italy,Luxembourg, Netherlands, Norway Portugal, Spain, Sweden, Switzerland and,United Kingdom.,CEN European Committee for Standard……
……